|Architect||FIGR Architecture Studio|
|Area||110 m2 (1184 sq.ft.)|
Nestled in the quiet streets of Elwood, ‘Silhouette Hytte’ House is located on a narrow 210m2 block. The site is 34.4m long by 6.1m wide and has an East facing backyard. Presented with a number of challenging constraints such as a heritage overlay, flood overlay and close proximity of neighbouring trees, the project required a carefully considered design response to achieve the clients brief.
The brief asked for a 3 bedroom, 2 bathroom house with open plan living, dining, kitchen and study that needed to be practical, contemporary and complimentary within its existing context. The architects wanted the proposition to be modest and for it to respect it’s context.
The familiar form and pitched roof makes reference to the existing house vernacular, with a playful and updated appearance. Formally the way we approached the building envelope was to use a simple extrusion of the existing house silhouette. The extruded envelope is reduced to its simplest form removing eaves and decorations. Subtractions in the envelope create openings to light and program amenity. Whilst the traditional roof profile is simplistic in form it is however very generous in volume.
The fold in the rear elevation negotiates the close proximity of the neighbouring tree canopy which further creates a dynamic experience to the rear facade with the building changing appearance and proportion from different vantage points. Insertions into the envelope in the form of the black metal shrouds establish openings that relate to both visual and natural light amenity. The basic forms allow the program to expand beyond the envelope and retain the simplistic form of the extrusion. This is expressed in the dinning room where the box form insertion into the extruded envelope allows the dining zone to expand beyond the envelope whilst retaining a functional open plan arrangement.
Existing bricks from the old shed have been re-used for the new backyard paving. The use of black standing seam metal cladding provides a strong contrast to the shiplapped timber boards and timber doors.
|Roofing||Colorbond Standing Seam Metal Roofing in Night Sky|
Silvertop Ash Ship Lap Cladding with Cutek Clear Oil Finish
Standing Seam Metal Cladding
|Internal Walls||CSR Plasterboard|
Silvertop Ash Ship Lap Cladding Treated in Osmo polyx
|Flooring||Royal Oaks Flooring – Aged Oak & Limed & Silver top ash Treated in Osmo polyx|
|Window Frames||KDHW in Cutek|
|Lighting||Hub and Lights and Tracks|
|Kitchen||Arctic Ice and Black Laminate, with black shadow lines|
Silvertop ash island bench finished in Osmo polyx
Grey Smoke Mirror Splashback
Bosch and Smeg appliances
Lithostone Quartz Surfaces – Calcatta Amazon
|Bathroom||Joinery – Armour panel Blackbutt finished in Osmo|
Stone – Lithostone Quartz Surfaces Calcatta Amazon
Plumbing Fixtures – Reece Plumbing
Tiles Wall – Tiento
Tiles Floor – Terrazzo
|Heating & Cooling||Central Cooling & Heating|